Posté le: 20.03.2010, 13:06:41 Sujet du message: Chargeur Lipo RAYTRONIC C60 a deux sorties avec équilibreur
Chargeur Lipo RAYTRONIC C60 a deux sorties avec équilibreur intégré
High-performance two-channel charger with integrated 7-channel balancers with a comfortable, yet simple operation. Up to 300 watts per channel power held under control by three fans , even very demanding users allowing full use at latest 5C Li-poly and A123 ® Li-Fe batteries. 20 memorie's for loading programs on each channel provides a very easy job even if you use dozens of different kinds of battery packs!
# Input supply voltage 11-28 V DC .
# Two independent channels for charging and discharging 1-18 NiCd / NiMH cells, 1-7 Li-ion/Li-poly/Li-Fe articles or 2-24 V lead-acid gel batteries.
# Adjustable charging current (0.1 A - 20.0 A). Max. Power: 300 W per channel. (max. once 200W + 200W)
# Adjustable discharge current (0.1 A - 10.0 A). Power dissipation is automatically limited to the maximum 50 W # End charging by regulators delta-peak for NiCd and NiMH batteries, optional charging mode (Normal, Linear, Reflex) with manual or fully automatic settings.
# Pb and Lithium batteries are charged using the "constant current / constant voltage ".
# Adjustable sensitivity of delta-peak detection .
# Repeated cycle operation of charging / discharging or discharging / charging of NiCd and NiMH batteries # Both channels have a built-in intelligent balancer used for individual compensation voltage of each cell lithium battery connected set with a tolerance of 5 mV during charging or discharging.
# Voltage on each article is for balancing continuously displayed on the screen.
# Temperature measurement with an (optional) temperature sensor internal resistance measurement .
# End battery charge after the alarm temperature, capacity or time.
# Memory for 20 programs for each charging channel
# Backlit LCD display with simple and clear menu and display parameters during charging simultaneously for both channel
# 3 built-in powerful fans for forced cooling of the active
# The safe operation contributes to a number of text message alert - incorrect input voltage, bad wiring, inadequate or battery status, incorrect polarity on the output ...
# Protection against short circuit and reverse polarity on output.
# To take full advantage of parameters requires a stabilized source of at least 13.8 V/40 A.
# Adjustable power limit to protect against overloading the power supply.
This makes the charger can be powered from a source and a lower capacity (from 12 V / 5 A), without the risk of congestion less efficient resources.
# Adjustable rate power for each channel charger.
Great care is given to charging lithium batteries.
When charging a lithium batterypack connect with service connector, you can charge or discharge and monitor voltage from each cell and a built-in balancer balances the voltages of each cell.
Set comes with a balance adapters available for some systems - PolyQuest / RAY / E-Tech and JST-XH (EASYCOPTER / Align / DualSky).
Service connectors are JST-EH (Kokam / Graupner / RC System) can engage directly in the socket on the charger - the first black cable connector kit must be connected to contact (-) on the right side of the charger socket.
A separate adapter plate for service connector system ThunderPower / ThunderFlight / MPX can be purchased separately.
To measure the temperature a probe can purchased (the same for Raytronic C16).
Charger kit includes: charger RAYTRONIC C60, 2x balance plate for lithium batteries with service connectors of PolyQuest / RAY / E-Tech, 2x balance plate for lithium batteries with service connectors System JST-XH (EASYCOPTER / Align / DualSky), alligator clips for the power cord. RAYTRONIC Chargers for RCM Pelikan are produced by Korean firm SJ, court supplier of chargers for many leading global companies in modelbusiness .
ils ont aussi d'autres modèles de chargeur que l'on connais sous d'autres appellations
Raytronic C30
RAYTRONIC C16
Raytronic C14
RAYTRONIC C12
Raytronic C10
Raytronic C8
Vous ne pouvez pas poster de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets dans ce forum Vous ne pouvez pas éditer vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
